NEW DEVICE!! FIAT FULL IMMO BYPASS 2020

DEMO HOW TO USE FIAT IMMO OF – NEW STAND ALONE BYPASS DEVICE

As on video – the procedure is easy and fast – simple plug and run the engine! No Pc need , no complications..

Fiat PANDA from 2012 to 2017 all engine models

Fiat 500 from 2007 to 2017 all engine models

Fiat 500 L – from 2007 to 2009 / 1.2 and 1.4 petrol / and 2010 – 2017 – all engine models

Lancia YPSILON from 2012 to 2017 all engine models

Alfa Romeo MITO from 2008 to 2017 all engine models

Fiat Grande Punto from 2008 to 2017 all engine models

Fiat Fiorino from 2008 to 2017 all engine models

Fiat new Doblo from 2012 to 2017 all engine models

Alfa Romeo -GIULIETTA from 2010 to 2017 all engine models

Fiat Abarth 500 from 2008 to 2017 all engine models

Fiat Ducato – 2010/2017 when equipped with DELPHI BCM MODULES or Mageti Marelli ecu 8f2 for 2.8 l engines

IVECO – from 2010 to 2017 Delphi BCM MODULES

Ford KA from 2008

see demo for start engine of FIAT 500 via OBD II

The Immo bypass tool is made to work with Fiat/Lancia/Alfa Romeo vehicles with Immo code system 2. The device can do automatically the following function:

Identification of the control unit via OBD II.
Resetting of the EPROM to virgin state in the ECU via OBD II without the use of the PC software.
Emulation of the Immo system code in the ECU via OBD II without using the PC software.   

All these functions will allow
you to start the vehicle whle the device is plugged into the OBD II
connector of the car .When you remove the device from the OBD II
connector the car will not start anymore until you plug in the device
again into the OBD II connector whle the ECU will stay in virgin mode
and you will be able to adapt any BCM or Immo box with existing working
key!

The whole procedure is done for 3 – 10 seconds.

THIS DEVICE NOT PROGRAMMING KEYS!!