Special mobile device for BMW and Mini Cooper key and transponder programming for CAS module which was developed to work via OBD II and also you can prepare on site keys or transponders with the device for programming to the car as the device consists of a car programmer and Hi Tag II key programmer. With this new Device when you program the keys via OBD II, the existing/old keys will not be erased and you will be able to use them again. The Device will program the remote control automatically at all available frequencies for Europe, North/South America, Africa and ASIA. The Device is powered up from the OBD II connector of the car. The Device is very useful for Auto Locksmiths, Auto engineers and Special Police Agencies!!
The device works with the latest BMW software ISTA V45/46/47/48/49/50/51/52/53/54/55/56/57 and up till the latest one for CAS 3/3+
Note: The new update V11.0 includes solution for MEVD17.2 DME for X5 and X6 with new sw ISTA 50 – ISTA 55 and up for reading DME_SK for key programming, if you program a new remote key/transponder to one BMW/Mini Cooper car with our device then you can use the same key again to program it on another car or it can be cleared with our device only and restore it in blank state. Also, the programming of new key for updated BMW vehicles where flashing is needed is reduced to 6 min.
Key programmers | obd devices