OPEL Corsa D emergency start device

OPEL Corsa D emergency start device
see the original
  • Product Code: OPEL Corsa D emergency start device
  • Availability: In Stock
  • 720.00€
  • Ex Tax: 600.00€
+
-



Tags: KEY LEARNING DEVICES


INSTRUCTIONS:

Key Programmer for OPEL Corsa D

Supported features:

- Program transponder-key

- Erase all transponder-keys

Using the device:

The device is easy to use and requires minimum user intervention. Any information, that is required from the user before starting to use the device can be provided by using the eight switches placed on the device. The user can set the operation mode of the device by setting the switches in different positions. For each functionality a specific combination of the positions of the switches is required before starting to use the device. Any feedback from the device to the user is provided using the green, red and yellow lamps placed on the device.


Program transponder-key:

1. To activate the function set switch 1 in position ON. Switch off all other switches except 9 and 10. Switch 9 and switch 10 must be in position ON.

2. Plug in the key which you want to program and switch ignition on.

3. Plug-in the device into the OBDII connector in the car.

4. Wait until the operation is completed – refer to the section “Indications for the user”

5. Turn ignition off

6. Plug off the device from the OBDII connector

7. If you want to program another key please repeat operations from step 2.

Erase all transponder-keys

1. To activate the function set switch 1 and switch 8 in position ON. Switch off all other switches except 9 and 10. Switch 9 and switch 10 must be in position ON.

2. Turn ignition on (engine off)

3. Plug-in the device into the OBDII connector in the car.

4. Wait until the operation is completed – refer to the section “Indications for the user”

5. Turn ignition off

6. Plug off the device from the OBDII connector

NOTE: Switch 9 and switch 10 must be always in position ON.

Indications for the user

Any feedback from the device to the user is given by the lamp placed on the device.

– Fast (4 Hz) blinking in red indicates operation in progress.

– Slow (1 Hz) blinking in green indicates that the operation is completed successfully.

Error indications:

Medium (2 Hz) asynchronous blinking in red and green indicate one of the following errors:

– wrong switch selection.

– failure during pin code extraction

– failure during entering security code into immobilizer

– failure during programming/erasing.


Related Products

Shipping

Free shipping on order over 300 euro

LUCKYLOCKS WARNS

All devices are sold for official use only!!! If you use them for any illegal purposes, this is your own responsibility !!!

NEW PRODUCT!!! HU101